   /*-----------------------------------------------------------.   
  /                       Description                           /
  '------------------------------------------------------------/

Game: Mount & Blade Warband
SweetFX version: 1.2 (updated for 1.3 by CeeJay.dk)
Author: TFL Replica
Description: "Breathes some life into game, better contrast, more natural colors"
Showcase: http://www.overclock.net/t/1296721/how-to-anti-aliasing-injection-methods/250#post_18387567


   /*-----------------------------------------------------------.
  /                      Choose effects                         /
  '-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING 1
#define USE_LUMASHARPEN 1 //Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
#define USE_BLOOM 0       // Bloom makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR 1         // Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_TECHNICOLOR 0 // Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_TONEMAP 0
#define USE_VIBRANCE 1    //Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_SEPIA 1
#define USE_VIGNETTE 0    //Darkens the edges of the image to make it more look like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER 0      //Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by vignette)

#define USE_DPX 1         //Unfinished - Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor
                          //I think the shader itself works, but the default settings need a lot of work. Maybe you can find some good settings?

   /*-----------------------------------------------------------.
  /                  SMAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/

#define SMAA_THRESHOLD 0.05           // (0.08-0.20) Edge detection threshold
#define SMAA_MAX_SEARCH_STEPS 64      // [0-98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 16  // [0-16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING 0        // [0-100] Determines the percent of antialiasing to apply to corners.

// -- Advanced SMAA settings --
#define COLOR_EDGE_DETECTION 1        // 1 Enables color edge detection (slower but more acurate) - 0 uses luma edge detection (faster)
#define SMAA_DIRECTX9_LINEAR_BLEND 0  // Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.


   /*-----------------------------------------------------------.
  /                       LumaSharpen settings                  /
  '-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength 0.5 // (0.2-2.0)Strength of the sharpening
#define sharp_clamp 0.030  // [0.0-1.0]Limits maximum amount of sharpening a pixel recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern 2          // Choose a sample pattern [ 1, 2, 3 or 4 ] - 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
#define offset_bias 1.0    // [0.0-6.0](1.0) Offset bias adjusts the radius of the sampling pattern.
                           // I designed the pattern for offset_bias 1.0, but feel free to experiment.
                           
// -- Debug settings --
#define splitscreen 0      // Enables the before-and-after splitscreen comparison mode. Left side is before.
#define show_sharpen 0     // Visualize the strength of the sharpen (multiplied by 4 to see it better)


   /*-----------------------------------------------------------.
  /                       Bloom settings                        /
  '-----------------------------------------------------------*/
#define BloomThreshold 20.25
#define BloomPower 1.446
#define BloomWidth 0.0142

   /*-----------------------------------------------------------.
  /                        HDR settings                         /
  '-----------------------------------------------------------*/
#define HDRPower 1.20  //Strangely lowering this makes the image brighter
#define radius2 0.80   //Raising this seems to make the effect stronger and also brighter


   /*-----------------------------------------------------------.
  /                      TECHNICOLOR settings                   /
  '-----------------------------------------------------------*/
#define TechniAmount 0.11
#define TechniPower 2.8
#define redNegativeAmount 0.88
#define greenNegativeAmount 0.88
#define blueNegativeAmount 0.88


   /*-----------------------------------------------------------.
  /                        Tonemap settings                     /
  '-----------------------------------------------------------*/
#define Gamma 1.0

#define Exposure 0.0

#define Saturation 0.0

#define Bleach 0.0

#define Defog 0.010  //How much of the color tint to remove
#define FogColor float3(0.00, 0.00, 2.55) //what color to remove - default is blue


   /*-----------------------------------------------------------.
  /                       Vibrance settings                     /
  '-----------------------------------------------------------*/
#define Vibrance -0.1  //Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.


   /*-----------------------------------------------------------.
  /                         Sepia settings                      /
  '-----------------------------------------------------------*/
#define ColorTone float3(1.40, 1.20, 0.90)
#define SepiaPower 0.20
#define GreyPower 0.07  

   /*-----------------------------------------------------------.
  /                       Vignette settings                     /
  '-----------------------------------------------------------*/
#define VignetteRadius 1.00  // lower values = stronger radial effect from center
#define VignetteAmount -1.00 // Strength of black. -2.00 = Max Black, 1.00 = Max White.
#define VignetteSlope 8      // How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter float2(0.500, 0.500) // Center of effect.


   /*-----------------------------------------------------------.
  /                        Dither settings                      /
  '-----------------------------------------------------------*/
//No settings yet, beyond switching it on or off in the top section.

//Note that checkerboard pattern used by Dither, makes an image harder to compress.
//This can make your screenshots and videos take up more space.


/////////////////////////////////////////////////////////////////
///////////////////////// Work in Progress //////////////////////
/////////////////////////////////////////////////////////////////

   /*-----------------------------------------------------------.
  /                      Cineon DPX settings                    /
  '-----------------------------------------------------------*/
//I have yet to find good default settings for this .. maybe you can?
float Red = 8.0;   //[1.0 - 15.0]
float Green = 8.0; //[1.0 - 15.0]
float Blue = 8.0;  //[1.0 - 15.0]

float ColorGamma = 2.5f;    //[0.1 - 2.5]
float DPXSaturation = 3.0f; //[0.0 - 8.0]

float RedC = 0.36;    //[0.6 - 0.2]
float GreenC  = 0.36; //[0.6 - 0.2]
float BlueC = 0.34;   //[0.6 - 0.2]

float Blend = 0.2; //[1.0 - 0.0] How strong the effect should be